IcETRAN 2017

IcETRAN conference 2017

The Best Section Young Researcher's Paper Awards 2017

The candidates for the awards are the authors of both, the national ETRAN (in Serbian) and the International IcETRAN conference (in English). The proposals of the awardees are made by the session chair and the member of the steering committee of a particular section. The Steering Committee of the Conferences made the final decision about the awards.

The young author of the awarded presentations will receive a special Diploma from ETRAN Society. Diploma will be delivered on the ceremony during the subsequent Conference, next year.

In the subsequent Conference the awarded young author will be granted with the Conference fee and one night accomodation if come without paper or with two nights accomodation if would have accepted a paper(s) as auithor or co-author, next year

The authors of the awarded presentations will be invited to submit an extended version of the article for publication in Serbian Journal of Electrical Engineering (free of charge).

Sections with more than 24 papers can propose awards for two young researchers. Sections with less than 8 presented papers are not qualified to propose the young researcher’s paper award.

In order to be awarded a young researcher should be the first author, to present the paper and to be a student of BS, MS or PhD not older than 25, 27, and 40 years, respectively.

ACOUSTICS – AK(I)

AKI2.6

DESIGN OF THE SPECIALIZED TUBE FOR SOUND TRANSMISSION LOSS MEASUREMENTS

Marko Ličanin, Faculty of Electronic Engineering, University of Niš, Serbia 
Ana Đorđević, Faculty of Electronic Engineering, University of Niš, Serbia
Dejan Ciric, Faculty of Electronic Engineering, University of Niš, Serbia

ANTENNAS AND PROPAGATION – AP(I)

API1.5

INVESTIGATION OF NATURAL TRANSMISSION ZEROS OF PRINTED COMBLINE FILTERS USING ELECTROMAGNETIC SIMULATORS

Jelena Dinkić, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia
Miodrag Tasić, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia
AntonijeĐorđević, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia

CONTROL SYSTEMS – AU(I)

AUI2.5

INTELLIGENT MOBILE ROBOT FOR WORKSPACE MAPPING

Vladimir Mitić, Faculty of Electronic Engineering, University of Niš, Serbia 
Miloš Petković, Faculty of Electronic Engineering, University of Niš, Serbia
Vladimir Sibinović, Faculty of Electronic Engineering, University of Niš, Serbia 
Darko Todorović, Faculty of Electronic Engineering, University of Niš, Serbia
Goran Đorđević, Faculty of Electronic Engineering, University of Niš, Serbia

BIOMEDICINE ENGINEERING – BT(I)

BTI1.4

THE PENDULUM TEST FOR ASSESSING SPASTICITY BASED ON SMART PHONE MOVIE AND PASSIVE MARKERS (YOUNG INVESTIGATOR)

Antonina Aleksic, University of Belgrade - School of Electrical Engineering, Belgrade, Serbia
Stevica Graovac, University of Belgrade - School of Electrical Engineering, Belgrade, Serbia
Dejan Popović, Institute of Technical Sciences of SASA, Belgrade, Serbia and University of Aalborg, Denmark

POWER ENGINEERING – EE(I)

EEI1.2

REAL-TIME SPEED ESTIMATION OF INDUCTION MACHINES USING ROTOR SLOT HARMONICS

Ivan Petric, School of the Electrical Engineering, University of Belgrade, Serbia 
Slobodan Vukosavic, School of the Electrical Engineering, University of Belgrade, Serbia

ELECTRIC CIRCUITS AND SYSTEMS AND SIGNAL PROCESSING – EK(I)

EK1.3

FREKVENCIJSKA ANALIZA FRAKCIONOG MODELA ELEKTRIČNOG VODA

FREQUENCY ANALYSIS OF FRACTIONAL TRANSMISSION LINE MODEL (in Serbian)

Stevan M. Cvetićanin, Univerzitet u NovomSadu, Fakultet tehničkih nauka, Novi Sad, Srbija
Dušan Zorica, Matematički institut Srpske akademije nauka i umetnosti, Beograd, Srbija; Univerzitet u NovomSadu, Prirodno-matematičkifakultet, Departmanzafiziku, Novi Sad, Srbija
Milan R. Rapaić, Univerzitet u NovomSadu, Fakultet tehničkih nauka, Novi Sad, Srbija

ELECTRONICS – EL(I)

ELI3.5

A MATLAB/SIMULINK MODEL OF A LANGEVIN’S ULTRASONIC POWER TRANSDUCERS

Igor Jovanović, University of Niš, Faculty of Electronic Engineering, Niš, Serbia
Uglješa Jovanović , University of Niš, Faculty of Electronic Engineering, Niš, Serbia
Dragan Mančić, University of Niš, Faculty of Electronic Engineering, Niš, Serbia

ELI3.3

PERSON DETECTION COUNTER BASED ON MM-WAVE RADAR TECHNOLOGY

Djordje Glavonjic, School of Electrical Engineering, University of Belgrade, NovelIC Microsystems, Belgrade, Serbia
Ivan Milosavljevic, School of Electrical Engineering, University of Belgrade, NovelICMicrosystems, Belgrade, Serbia
Dusan Krcum, School of Electrical Engineering, University of Belgrade, NovelIC Microsystems, Belgrade, Serbia
VeljkoMihajlović, School of Electrical Engineering, University of Belgrade, NovelIC Microsystems, Belgrade, Serbia
Lazar V. Saranovac, School of Electrical Engineering, University of Belgrade,  Belgrade, Serbia

METROLOGY – ML(I)

ML2.3

UNAPREĐENJE POSTOJEĆE METODE ASINHRONOG UZORKOVANJA PRI ODREĐIVANJU RMS VREDNOSTI

IMPROVEMENT EXISTING METHOD OF ASYNCHRONOUS SAMPLINGAT DETERMINING OF RMS VALUE (in Serbian)

Stefan Mirković, Univerzitet u NovomSadu, Fakultet tehničkih nauka 
Dragan Pejić, Univerzitet u NovomSadu, Fakultet tehničkih nauka
Marjan Urekar, Univerzitet u NovomSadu, Fakultet tehničkih nauka
Bojan Vujičić, Univerzitet u NovomSadu, Fakultet tehničkih nauka
ĐorđeNovaković, Univerzitet u NovomSadu, Fakultet tehničkih nauka

MICROELECTRONICS AND OPTOELECTRONICS – MO(I)

MO3.1

ŠESTOUGAONI SILICENSKI NANOPRSTEN SA CIK-CAK IVICAMA U NORMALNOM MAGNETSKOM POLJU

HEXAGONAL SILICONE NANORING WITH ZIGZAG EDGES IN PERPENDINCULAR MAGNETIC FIELD (in Serbian)

DušanJakovljević, Elektrotehničkifakultet, Univerzitet u Beogradu, Srbija
Marko Grujić, Elektrotehničkifakultet, Univerzitet u Beogradu, Srbija
Milan Tadić, Elektrotehničkifakultet, Univerzitet u Beogradu, Srbija

MICROWAVE TECHNIQUE, TECHNOLOGIES AND SYSTEMS – MT(I)

MT1.2

PARAMETRI RASEJANJA ZA VOD SPREGNUT SA ANTISIMETRIČNIM REZONATORIMA

Vojislav Milosević, Institut za fiziku, Beograd, Srbija
Branka Jokanović, Institut za fiziku, Beograd, Srbija

NEW MATERIALS IN ELECTRICAL AND ELECTRONIC ENGINEERING – NM(I)

(not awarded)

NUKLEARNA TEHNIKA / NUCLEAR ENGINEERING AND TECHNOLOGY - NT(I)

NTI1.5

COMPARISON OF THE ANGULAR RESPONSE OF THERMOLUMINESCENT AND OPTICALLY STIMULATED LUMINESCENT PERSONAL DOSIMETERS

Filip Haralambos Apostolakopoulos, School of Electrical Engineering, University of Belgrade; Public company “Nuclear Facilities of Serbia”, Belgrade, Serbia
Nikola Kržanović, School of Electrical Engineering and Vinča Institute of Nuclear Sciences, University of Belgrade, Serbia
Luka Perazić, School of Electrical Engineering, University of Belgrade; Public company “Nuclear Facilities of Serbia”, Belgrade, Serbia
Koviljka Stanković, School of Electrical Engineering, University of Belgrade, Serbia

ROBOTICS AND FLEXIBLE AUTOMATION – RO(I)

ROI2.1

DEVELOPMENT OF SOFT ROBOTIC GRIPPER WITH EMBEDDED ACTIVE ELEMENTS

Andrija Milojević, School of Energy Systems, Department of Mechanical Engineering, Laboratory of Intelligent Machines, Lappeenranta University of Technology, Finland and Faculty of Mechanical Engineering, University of Niš, Serbia
Žarko Ćojbašić, Faculty of Mechanical Engineering, University of Niš, Serbia
Miša Tomić, Faculty of Mechanical Engineering, University of Niš, Serbia
Heikki Handroos, School of Energy Systems, Department of Mechanical Engineering, Laboratory of Intelligent Machines, Lappeenranta University of Technology, Finland

COMPUTING AND INFORMATION ENGINEERING – RT(I)

RT3.1

SISTEM ZA GENERISANJE PROGRAMSKIH SEGMENATA ZA ISPITIVANJE U OBLASTI VREMENSKE SLOŽENOSTI ALGORITAMA

THE PROGRAM SEGMENT ASSEMBLING SYSTEM FOR EXAMINATION IN THE FIELD OF ALGORITHMIC TIME COMPLEXITY (in Serbian)

Djordje Pesić, RT-RK, Serbia
Marko Mišić, University of Belgrade, School of Electrical Engineering, Serbia
Jelica Protić, University of Belgrade, School of Electrical Engineering, Serbia
Milena Vujošević Janičić, University of Belgrade, School of Electrical Engineering, Serbia

RT3.4

JEDNO REŠENJE CLOUDSIM SIMULACIJE DISTRIBUIRANE STM

A SOLUTION OF CLOUDSIM SIMULATION OF DISTRIBUTED STM (in Serbian)

Dragan Brkin, Univerzitet u NovomSadu, Fakultet tehničkih nauka, Srbija
Branislav Kordić, RT-RK Institute for Computer Based Systems, Serbia
Miroslav Popović, Univerzitet u Novom Sadu, Fakultet tehničkih nauka, Srbija

TELECOMMUNICATIONS - TE(I)

TE1.5

UTICAJ PARAMETARA KVALITETA SERVISA NA SUBJEKTIVNU I OBJEKTIVNU PROCENU KVALITETA VIDEA

THE IMPACT OF QUALITY OF SERVICE PARAMETERS TO THESUBJECTIVE AND OBJECTIVE VIDEO QUALITY ASSESSMENT (in Serbian)

Danilo Stanojević, Univerzitet odbrane u Beogradu, Vojna akademija
Boban Bondžulić, Univerzitet odbrane u Beogradu, Vojna akademija
Boban Pavlović, Univerzitet odbrane u Beogradu, Vojna akademija 
Vladimir Petrović, Univerzitet odbrane u Beogradu, Vojna akademija

ARTIFICIAL INTELLIGENCE – VI(I)

(not awarded)



Ministry of Education, Science and Technological Development


University of Belgrade
School of Electical Engineering