ACOUSTICS - AKI

Session AKI1. Acoustic properties of materials, Noise

AKI1.1 (Invited paper)

FROM METAPOROUS MATERIALS TO SUBWAVELENGTH ABSORBERS: SOME RECIPES TO DESIGN PERFECT SOUND ABSORBERS

Jean-Philippe Groby, Laboratoire d’Acoustique de l’Université du Maine, UMR 6613 CNRS, Le Mans, France
N. Jimenez, Laboratoire d’Acoustique de l’Université du Maine, UMR 6613 CNRS, Le Mans, France
L. Schwan, Laboratoire d’Acoustique de l’Université du Maine, UMR 6613 CNRS, Le Mans, France
C. Lagarrigue, Metacustic, Le Mans, France
W. Huang, Laboratoire d’Acoustique de l’Université du Maine, UMR 6613 CNRS, Le Mans, France
V. Romero Garcia, Laboratoire d’Acoustique de l’Université du Maine, UMR 6613 CNRS, Le Mans, France
V. Tournat, Laboratoire d’Acoustique de l’Université du Maine, UMR 6613 CNRS, Le Mans, France
V. Pagneux, Laboratoire d’Acoustique de l’Université du Maine, UMR 6613 CNRS, Le Mans, France
O. Dazel, Laboratoire d’Acoustique de l’Université du Maine, UMR 6613 CNRS, Le Mans, France
T. Weisser, Laboratoire MIPS, Université de Haute-Alsace, Mulhouse, France
Y. Aurégan, Laboratoire d’Acoustique de l’Université du Maine, UMR 6613 CNRS, Le Mans, France
B. Nennig, Institut supérieur de mécanique de Paris (SUPMECA), Laboratoire Quartz EA 7393, Saint-Ouen, France

AKI1.2

DEVELOPMENT AND REALIZATION OF MULTILAYERED THIN SOUND REDUCTION PANEL FOR EXISTING WALLS

Tsvetan Nedkov, Decibel Ltd., Sofia, Bulgaria
Diana Tzonevska, Decibel Ltd., Sofia, Bulgaria

AKI1.3

INFLUENCE OF HARDNESS AND DAMPING FACTOR OF POROUS MATERIAL UPON GENERATED DRUM SOUND FROM IMPACT OF METAL DISK AND METAL PLATE

Snejana Pleshkova, Faculty of Telecommunications, Technical University of Sofia, Bulgaria
Aleksandar Vasilev Kirechev, Faculty of Telecommunications, Technical University of Sofia, Bulgaria
Dejan Ciric, Faculty of Electronic Engineering, University of Niš, Serbia
Tsvetan Nedkov, Decibel Ltd., Sofia, Bulgaria

AKI1.4

SELECTION OF MEASUREMENT STRATEGY FOR THE ASSESSMENT OF THE LONG-TERM ENVIRONMENTAL NOISE INDICATORS

Darko Mihajlov, Faculty of Occupational Safety, University of Niš, Serbia
Momir Praščević, Faculty of Occupational Safety, University of Niš, Serbia

AKI1.5

PREDICTIONS OF NOISE GENERATED BY ELEVATED SOURCES IN INDUSTRIAL ENVIRONMENTS

Dragan Novkovic, School of Electrical and Computer Engineering of Applied Studies, Belgrade, Serbia
Milan Stojiljkovic, independent engineering consultant in acoustics and vibration, Novi Sad, Serbia
Stephen Lloyd, Vibration, Dynamics and Noise Unit at Wood Group, Perth, Australia

AKI1.6

ANALYSIS OF WAVELET USAGE IN DE-NOISING OF ROOM IMPULSE RESPONSES

Đorđe Damnjanović, Faculty of Technical Sciences Čačak, University of Kragujevac, Serbia
Dejan Ciric, Faculty of Electronic Engineering, University of Niš, Serbia

Session AKI2. Acoustic measurements, Speech

AKI2.1

EQUALIZATION FREQUENCY CHARACTERISTICS OF THE MICROPHONE FOR ACOUSTIC CAMERA

Ognjen Jovanović, School of Electrical Engineering, University of Belgrade, Serbia
Miloš Bjelić, School of Electrical Engineering, University of Belgrade, Serbia
Jelena Ćertić, School of Electrical Engineering, University of Belgrade, Serbia

AKI2.2

IMPLEMENTATION AND APPLICATION OF FPGA PLATFORM WITH DIGITAL MEMS MICROPHONE ARRAY

Dejan Todorovic, Dirigent Acoustics, Belgrade, Serbia
Iva Salom, Mihailo Pupin Institute, Belgrade, Serbia
Vladimir Celebic, Mihailo Pupin Institute, Belgrade, Serbia
Jurij Prezelj, Faculty of mechanical engineering, University of Ljubljana, Slovenia

AKI2.3 (The Best Section Paper)

METHOD FOR OBJECTIVE MEASUREMENT OF ACOUSTIC SCATTERING IN CLOSED SPACES USING FINITE DIFFERENCES IN TIME DOMAIN

Ivaylo Hristev, Faculty of Telecommunications, Technical University of Sofia, Bulgaria
Snejana Pleshkova, Faculty of Telecommunications, Technical University of Sofia, Bulgaria

AKI2.4

SOUND MASKING SYSTEMS EFFECTIVENESS IN OPEN OFFICES ESTIMATION FROM SPEECH TRANSMISSION INDEX MEASUREMENTS

Stanislav Filipov, Faculty of Telecommunications, Technical University of Sofia, Bulgaria
Snejana Pleshkova, Faculty of Telecommunications, Technical University of Sofia, Bulgaria
Ivaylo Hristev, Faculty of Telecommunications, Technical University of Sofia, Bulgaria

AKI2.5

ANALYSIS OF EXPERIMENTALLY DETERMINED TRANSFER FUNCTION OF PHOTOACOUSTIC SYSTEM DETECTION PART

Slobodan Todosijević, School of Electrical Engineering, University of Belgrade, Serbia and Faculty of Mechanical and Civil Engineering in Kraljevo, University of Kragujevac, Serbia
Dejan Ciric, Faculty of Electronic Engineering, University of Niš, Serbia
Branko Radičević, Faculty of Mechanical and Civil Engineering in Kraljevo, University of Kragujevac, Serbia

AKI2.6 (Best Young Researcher's Paper)

DESIGN OF THE SPECIALIZED TUBE FOR SOUND TRANSMISSION LOSS MEASUREMENTS

Marko Ličanin, Faculty of Electronic Engineering, University of Niš, Serbia
Ana Đorđević, Faculty of Electronic Engineering, University of Niš, Serbia
Dejan Ciric, Faculty of Electronic Engineering, University of Niš, Serbia

AKI2.7

ABOUT APPLICABILITY OF AUTOMATIC SPEAKER RECOGNITION ALGORITHM FOR AUTOMATIC RECOGNITION OF SOUNDS IN NATURE

Ivan Jokić, Faculty of Technical Sciences, University of Novi Sad, Serbia
Stevan Jokić, Faculty of Technical Sciences, University of Novi Sad, Serbia
Vlado Delić, Faculty of Technical Sciences, University of Novi Sad, Serbia
Zoran Perić, Faculty of Electronic Engineering, University of Niš, Serbia

AKI2.8

RECOGNITION OF NORMAL AND WHISPERED SPEECH BASED ON RASTA FILTERING AND DTW ALGORITHM

Branko Marković, School of Electrical Engineering, University of Belgrade, Serbia and Čačak Technical College, Serbia
Goran Stevanović, Railways of the Republic of Srpska a.d. Doboj, Bosnia and Herzegovina and Čačak Technical College, Serbia
Slobodan Jovičić, School of Electrical Engineering, University of Belgrade, Serbia and Life Activities Advancement Center, Belgrade, Serbia
Miomir Mijić, School of Electrical Engineering, University of Belgrade, Serbia
Jovan Galić, Faculty of Electrical Engineering, University of Banja Luka, Bosnia and Herzegovina
Đorđe Grozdić, School of Electrical Engineering, University of Belgrade, Serbia and Life Activities Advancement Center, Belgrade, Serbia

ANTENNAS AND PROPAGATION – API

Session API1. Antennas and propagation

API1.1 (Invited paper)

RECONFIGURABLE, CIRCULARLY POLARIZED AND SCANNING ANTENNAS FOR WIRELESS NETWORKS

Branka Jokanović, Institute of Physics, University of Belgrade, Belgrade, Serbia

API1.2

TWO-DIMENSIONAL GREEN'S FUNCTION FOR A TRUNCATED WEDGE

Dragan Filipović, Faculty of Electrical Engineering , University of Montenego, Podgorica, Montenegro
Tatjana Dlabač, Faculty of Maritime Studies, University of Montenego, Kotor, Montengro
Vladan Durković, Faculty of Electrical Engineering , University of Montenego, Podgorica, Montenegro/School of Electrical Engineering, University of Belgrade, Belgrade, Serbia

API1.3

RBFNN HIERARCHICAL MODEL FOR DOA ESTIMATION WITH THE SAME NUMBER OF RADIATION SOURCES AND RECEIVING ANTENNA ARRAY ELEMENTS

Veljko Nikolić, Technical test center, Serbian General Staff, Belgrade, Serbia
Vera Marković, Faculty of Electronic Engineering, University of Nis, Nis, Serbia
Aleksandar Kovačević, Technical test center, Serbian General Staff, Belgrade, Serbia
Nenad Munić, Technical test center, Serbian General Staff, Belgrade, Serbia

API1.4

MICROWAVE TOMOGRAPHY BASED ON TIME-DOMAIN SOLVER AND ADAPTIVE OPTIMIZATION

Milos Subotic, University of Novi Sad, Faculty of Technical Sciences, Computing and control engineering dept., Novi Sad, Serbia/RT-RK Institute for Computer Based Systems, Novi Sad, Serbia
Stefan Pijetlovic, University of Novi Sad, Faculty of Technical Sciences, Computing and control engineering dept., Novi Sad, Serbia/RT-RK Institute for Computer Based Systems, Novi Sad, Serbia
Nebojsa Pjevalica, University of Novi Sad, Faculty of Technical sciences, Computing and control engineering dept., Novi Sad, Serbia

API1.5 (Best Young Researcher's Paper)

INVESTIGATION OF NATURAL TRANSMISSION ZEROS OF PRINTED COMBLINE FILTERS USING ELECTROMAGNETIC SIMULATORS

Jelena Dinkić, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia
Miodrag Tasić, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia
Antonije Đorđević, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia

API1.6

IMPROVED EFFICIENCY OF MATRIX FILL IN HIGHER ORDER MODELING OF AXIALLY SYMMETRIC ANTENAS

Aleksandra Krneta, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia
Branko Kolundžija, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia

API1.7

MODELING OF THE INFLUENCE OF CORONA ON THE TRANSMISSION LINES DURING LIGHTNING DISCHARGE

Milan Ignjatovic, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia
Jovan Cvetic, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia
Nikola Mijajlovic, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia
Dragan Pavlovic, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia

API1.8

NEW PRINTED ANTENNA STRUCTURES SUITABLE FOR MILLIMETER–WAVE RANGES

Aleksandar Nešić, IMTELKomunikacijea.d, Beograd, Srbija
Ivana Radnović, IMTEL Komunikacije a.d, Beograd, Srbija

AUTOMATIC CONTROL – AUI

Session AUI1. Signals and Systems

AUI1.1

A Survey on Sequential Monte Carlo Particle PHD Algorithm

Zvonko Radosavljević, Military Technical Institute, Belgrade, Serbia
Branko Kovačević,School of Electrical Engineering, University of Belgrade, Serbia

AUI1.2

An Image Processing Based Motion Tracker/Estimator for Traffic Control Purposes

Ivana Vujanović, School of the Electrical Engineering, University of Belgrade, Serbia
Sagir Abdulla Abdalgalil, School of the Electrical Engineering, University of Belgrade, Serbia
Stevica Graovac, School of the Electrical Engineering, University of Belgrade, Serbia

AUI1.3

Baseline system for speaker recognition - parameter analysis

Željko Nedeljković, School of the Electrical Engineering, University of Belgrade, Serbia
Milana Milošević, School of the Electrical Engineering, University of Belgrade, Serbia
Željko Đurović, School of the Electrical Engineering, University of Belgrade, Serbia

AUI1.4 (The Best Section Paper)

A New Drift Correction Algorithm for Distributed Time Synchronization

Milos Stankovic, Innovation Center, School of Electrical Engineering, University of Belgrade, Serbia
Srdjan Stankovic, School of Electrical Engineering, University of Belgrade, Serbia
Karl Henrik Johansson, School of Electrical Engineering, KTH Royal Institute of Technology, Sweden

AUI1.5

Analysis of a method for mitigating miscorrelations in target tracking algorithms

Asem Al-Hasaeri, School of Electrical Engineering, University of Belgrade, Serbia
Predrag Tadić, School of Electrical Engineering, University of Belgrade, Serbia
Aleksandra Marjanović, School of Electrical Engineering, University of Belgrade, Serbia
Željko Đurović, School of Electrical Engineering, University of Belgrade, Serbia

AUI1.6

Distributed Multi-target Tracking in Camera Networks Using Multi-step Consensus

Nemanja Ilic, Technical College of Applied Studies, Krusevac and Vlatacom Institute, Belgrade, Serbia
Khaled Obaid Al Ali, Etimad, Abu Dhabi, United Arab Emirates and Vlatacom Institute, Belgrade, Serbia
Milos Stankovic, Innovation Center, School of Electrical Engineering, University of Belgrade, Serbia
Srdjan Stankovic, School of Electrical Engineering, University of Belgrade, Serbia

Session AUI2. Modeling and Control

AUI2.1 (Invited paper)

Technical and Non-Technical Applications of Evolving Takagi-Sugeno-Kang Fuzzy Models

Radu-Emil Precup, Dept. of Automation and Applied Informatics, Politehnica University of Timisoara, Romania
Stefan Preitl, Dept. of Automation and Applied Informatics, Politehnica University of Timisoara, Romania
Claudia-Adina Dragos, Dept. of Automation and Applied Informatics, Politehnica University of Timisoara, Romania
Mircea-Bogdan Radac, Dept. of Automation and Applied Informatics, Politehnica University of Timisoara, Romania
Alexandra-Iulia Szedlak-Stînean, Dept. of Automation and Applied Informatics, Politehnica University of Timisoara, Romania
Elena-Lorena Hedrea, Dept. of Automation and Applied Informatics, Politehnica University of Timisoara, Romania
Raul-Cristian Roman, Dept. of Automation and Applied Informatics, Politehnica University of Timisoara, Romania

AUI2.2

Distributed order PID optimization in comparison with fractional PID optimization based on performance and robustness indices

Boris Jakovljević, Faculty of Technical Sciences, University of Novi Sad, Serbia
Tomislav Šekara, School of Electrical Engineering, University of Belgrade, Serbia
Milan Rapaić, Faculty of Technical Sciences, University of Novi Sad, Serbia
Zoran Jeličić, Faculty of Technical Sciences, University of Novi Sad, Serbia

AUI2.3

An Adaptive Internal Model-based Neural Controller with Embedded Integral Action

Milorad Bozic, Faculty of Electrical Engineering, University of Banja Luka, Bosnia and Herzegovina
Petar Maric, Faculty of Electrical Engineering, University of Banja Luka, Bosnia and Herzegovina
Igor Krcmar, Faculty of Electrical Engineering, University of Banja Luka, Bosnia and Herzegovina

AUI2.4

Acoustic Noise Detection and Classification Based on Support Vector Machines

Sanja Vujnović, School of Electrical Engineering, University of Belgrade, Serbia
Goran Kvaščev, School of Electrical Engineering, University of Belgrade, Serbia
Branko Kovačević, School of Electrical Engineering, University of Belgrade, Serbia
Lazar Cokić, School of Electrical Engineering, University of Belgrade, Serbia

AUI2.5 (Best Young Researcher's Paper)

Intelligent Mobile Robot for Workspace Mapping

Vladimir Mitić, Faculty of Electronic Engineering, University of Niš, Serbia
Miloš Petković, Faculty of Electronic Engineering, University of Niš, Serbia
Vladimir Sibinović, Faculty of Electronic Engineering, University of Niš, Serbia
Darko Todorović, Faculty of Electronic Engineering, University of Niš, Serbia
Goran Đorđević, Faculty of Electronic Engineering, University of Niš, Serbia

BIOMEDICINE – BTI

Session BTI1. Biomedical instrumentation and signal processing

BTI1.1

THE DRAWING TEST AS A TOOL FOR EVALUATION OF MOTOR IMPAIRMENT: CORRELATION WITH THE WOLF MOTOR FUNCTION TEST (Young investigator)

Milica Isaković, University of Belgrade - School of Electrical Engineering, Belgrade, Serbia, and Tecnalia Serbia Ltd, Belgrade, Serbia
Andrej Savić, University of Belgrade - School of Electrical Engineering, Belgrade, Serbia, and Tecnalia Serbia Ltd, Belgrade, Serbia
Miloš Kostić, Tecnalia Research & Innovation - Health Division, San Sebastian, Spain
Ljubica Konstantinović, Clinic for Rehabilitation “Dr Miroslav Zotović”, University of Belgrade – Faculty of Medicine, Belgrade, Serbia
Mirjana Popović, University of Belgrade - School of Electrical Engineering, Belgrade, Serbia

BTI1.2

IMPROVEMENT OF GAIT SPEED IN PATIENTS WITH STROKE RELATED FOOT DROP BY FESIA WALK SYSTEM (Young investigator)

Suzana Dedijer Dujović, Clinic for rehabilitation "Dr Miroslav Zotović" and University of Belgrade, Serbia
Jovana Malešević, Tecnalia Serbia Ltd, Belgrade, Serbia, and University of Belgrade, Serbia
Mirjana Popović, University of Belgrade - School of Electrical Engineering, Belgrade, Serbia
Ljubica Konstantinović, Clinic for Rehabilitation “Dr Miroslav Zotović”, University of Belgrade – Faculty of Medicine, Belgrade, Serbia

BTI1.3

ANDROID APPLICATION FOR REMOTE MONITORING OF PATIENTS WITH MOVEMENT DISORDERS

Lazar Berbakov, Institute Mihajlo Pupin, Belgrade, Serbia
Bogdan Pavković, RT-RK, Novi Sad, Serbia and Faculty of Technical Sciences, Novi Sad, Serbia
Vladana Marković, Neurology Clinic, Clinical Center of Serbia, Belgrade, Serbia
Marina Svetel, Neurology Clinic, Clinical Center of Serbia, Belgrade, Serbia

BTI1.4 (Best Young Researcher's Paper)

THE PENDULUM TEST FOR ASSESSING SPASTICITY BASED ON SMART PHONE MOVIE AND PASSIVE MARKERS (Young investigator)

Antonina Aleksic, University of Belgrade - School of Electrical Engineering, Belgrade, Serbia
Stevica Graovac, University of Belgrade - School of Electrical Engineering, Belgrade, Serbia
Dejan Popović, Institute of Technical Sciences of SASA, Belgrade, Serbia and University of Aalborg, Denmark

BTI1.5

SLOW WAVE DYSFUNCTION AND PAROXYSM SOUND DETECTION: A CASE STUDY OF EEG DATA SONIFICATION IN TWO PATIENTS WITH EPILEPSY (Young investigator)

Nikola Ivančević, Clinic of Neurology and Psychiatry for Children and Youth, Belgrade, Serbia
Nebojša Malešević, Department of Biomedical Engineering, Lund University, Sweden, and University of Belgrade - School of Electrical Engineering, Belgrade, Serbia
Borjana Valčić, Faculty of Music, University of Arts in Belgrade
Jelena Ćertić, University of Belgrade - School of Electrical Engineering, Belgrade, Serbia
Milica M. Janković, University of Belgrade - School of Electrical Engineering, Belgrade, Serbia
Dejan Stevanović, Clinic of Neurology and Psychiatry for Children and Youth, Belgrade, Serbia
Blažo Nikolić, Clinic of Neurology and Psychiatry for Children and Youth, Belgrade, Serbia
Mirjana Popović, University of Belgrade - School of Electrical Engineering, Belgrade, Serbia
Jasna Jančić, Clinic of Neurology and Psychiatry for Children and Youth, Belgrade, Serbia

BTI1.6

SYSTEM FOR VALIDATION OF DOPPLER RADAR SENSORS FOR HEARTBEAT AND RESPIRATION MONITORING (Young investigator)

Vladimir Petrović, University of Belgrade - School of Electrical Engineering, Belgrade, Serbia
Nebojša Malešević, Department of Biomedical Engineering, Lund University, Sweden, and University of Belgrade - School of Electrical Engineering, Belgrade, Serbia
Milica M. Janković, University of Belgrade - School of Electrical Engineering, Belgrade, Serbia
Bojana Petrović, NovelIC Microsystems, Belgrade, Serbia
Veljko Mihajlović, NovelIC Microsystems, Belgrade, Serbia

BTI1.7

MODIFIED LAPLACIAN PYRAMID FOR FASTER RADIOGRAPHY IMAGE PROCESSING

Vladimir Ostojic, Faculty of Technical Sciences, University of Novi Sad, Serbia
Đordje Starčević, Faculty of Technical Sciences, University of Novi Sad, Serbia
Vladimir Petrović, Faculty of Technical Sciences, University of Novi Sad, Serbia
Siniša Suzić, Faculty of Technical Sciences, University of Novi Sad, Serbia
Tijana Delić, Faculty of Technical Sciences, University of Novi Sad, Serbia

BTI1.8

HOMOMORPHIC ALPHA BLENDING OF LONG BONE DIGITAL RADIOGRAPHY IMAGES

Djordje Starcevic, Faculty of Technical Sciences, University of Novi Sad, Serbia
Vladimir Ostojic, Faculty of Technical Sciences, University of Novi Sad, Serbia
Vladimir Petrović, Faculty of Technical Sciences, University of Novi Sad, Serbia

Session BTI2. Neurorehabilitation, Electrotherapy

BTI2.1 (Invited paper)

OSSEOINTEGRATED PROSTHESIS WITH NEURAL CONTROL AND SENSORY FEEDBACK

Nebojša Malešević, Department of Biomedical Engineering, Lund University, Sweden, and University of Belgrade - School of Electrical Engineering, Belgrade, Serbia

BTI2.2

PROPRIOCEPTIVE FEEDBACK VIA DYNAMIC STIMULATION PATTERNS IN CLOSED-LOOP CONTROL OF MULTI-DOF VIRTUAL PROSTHESIS (Young investigator)

Milica Isaković, University of Belgrade - School of Electrical Engineering, Belgrade, Serbia, and Tecnalia Serbia Ltd, Belgrade, Serbia
Matija Štrbac, University of Belgrade - School of Electrical Engineering, Belgrade, Serbia, and Tecnalia Serbia Ltd, Belgrade, Serbia
Minja Belić, Tecnalia Serbia Ltd, Belgrade, Serbia, and University of Belgrade, Serbia
Thierry Keller, Tecnalia Research & Innovation - Health Division, San Sebastian, Spain
Strahinja Došen, Department of Neurorehabilitation Systems, Clinic for Trauma Surgery, Orthopedics and Plastic Surgery, University Medical Center, Göttingen, Germany

BTI2.3

A SYSTEMATIC METHOD TO DETERMINE CUSTOMISED FES CYCLING PATTERNS AND ASSESS THEIR EFFICIENCY

Lana Popović-Maneski, Institute of Technical Sciences of the Serbian Academy of Sciences and Arts, Belgrade, Serbia
Amine Metani, University of Lyon, ENS de Lyon, France
Francois Le Jeune, University of Lyon, ENS de Lyon, France
Vance Bergeron, University of Lyon, ENS de Lyon, France

BTI2.4

ESTIMATION OF GAIT PARAMETERS BASED ON DATA FROM INERTIAL MEASUREMENT UNITS (Young investigator)

Ivan Topalović, University of Belgrade - School of Electrical Engineering, Belgrade, Serbia
Dejan Popović, Institute of Technical Sciences of SASA, Belgrade, Serbia and University of Aalborg, Denmark

POWER ENGINEERING – EEI

Session EE(I)1. Power engineering

EEI1.1 (Invited paper)

STATIC POWER CONVERTERS - PAST, PRESENT AND FUTURE

Petar Grbović, Center of Power Electronics and Drives C-PED Lab., Roma TRE Université,Italy

EEI1.2

REAL-TIME SPEED ESTIMATION OF INDUCTION MACHINES USING ROTOR SLOT HARMONICS

Ivan Petric, School of the Electrical Engineering, University of Belgrade, Serbia
Slobodan Vukosavic, School of the Electrical Engineering, University of Belgrade, Serbia

EEI1.3

OVERVIEW OF THE DISTRIBUTION TEST GRIDS WITH DISTRIBUTED GENERATION AND HVDC

Aleksandar Stanisavljevic, Faculty of Technical Sciences, University of Novi Sad, Serbia
Vladimir Katic, Faculty of Technical Sciences, University of Novi Sad, Serbia
Boris Dumnic, Faculty of Technical Sciences, University of Novi Sad, Serbia
Bane Popadic, Faculty of Technical Sciences, University of Novi Sad, Serbia

EEI1.4

DC-LINK VOLTAGE OSCILLATION INFLUENCE ON GRID CONNECTED CONVERTER POWER QUALITY

Bane Popadic, Faculty of Technical Sciences, University of Novi Sad, Serbia
Boris Dumnic, Faculty of Technical Sciences, University of Novi Sad, Serbia
Dragan Milicevic, Faculty of Technical Sciences, University of Novi Sad, Serbia
Vladimir Katić, Faculty of Technical Sciences, University of Novi Sad, Serbia
Aleksandar Stanisavljevic, Faculty of Technical Sciences, University of Novi Sad, Serbia

EEI1.5 (The Best Section Paper)

MULTI-AXIS DRIVE DC LINK CURRENT MINIMIZATION

 Luka Lopin, School of Electrical Engineering, University of Belgrade, Serbia
Nikola Lepojević, School of Electrical Engineering, University of Belgrade, Serbia

EEI1.6

ARDUINO AND RASPBERRY PI BASED SOLUTION FOR ELECTRICAL MACHINES DATA ACQUISITION SYSTEM

Filip Filipovic, Faculty of Electronic Engineering, University of Niš, Serbia
Milutin Petronijevic, Faculty of Electronic Engineering, University of Niš, Serbia
Nebojša Mitrović, Faculty of Electronic Engineering, University of Niš, Serbia
Bojan Bankovic, Faculty of Electronic Engineering, University of Niš, Serbia

EEI1.7

OVERVIEW OF THE CONFIGURATION AND POWER CONVERTERS IN HIGH VOLTAGE DIRECT CURRENT TRANSMISSION SYSTEMS

Nemanja Savić, Faculty of Technical Sciences, University of Novi Sad. , Serbia
Vladimir Katic, Faculty of Technical Sciences, University of Novi Sad, , Serbia

ELECTRIC CIRCUITS AND SYSTEMS AND SIGNAL PROCESSING – EKI

Session EKI1. Energy Efficiency of Computer System for Analysis and Design of Digital and Analog Systems

EKI1.1 (Invited paper)

METHOD OF FILTERING TABLES DESIGN FOR ULTRA-FAST SWITCHING FOR SYSTEMS WITH LIMITED RESOURCES

Sergey Makov, Radio and electro-technical Department, Don State Technical University of Rostov-on-Don, Shakhty, Rostov reg., Russia

EKI1.2

THE ELECTRICAL CIRCUITS EDUCATION USING COMPUTER ALGEBRA SYSTEMS ON RASPBERRY PI

Vladimir Mladenovic, University of Kragujevac, Faculty of Technical Sciences, Čačak, Serbia,
Sergey Makov, Don State Technical University of Rostov-on-Don, Shakhty, Rostov reg., Russia,
Yigang Cen, Beijing Jiaotong University, School of Computer and Information Technology, Beijing, China,
Viacheslav Voronin, Don State Technical University, Shakhty, Rostov region, Russia, >
Zivadin Micic, University of Kragujevac, Faculty of Technical Sciences in Čačak, Čačak, Serbia

EKI1.3

INTEGRATION OF SOFTWARE SCHEMATICSOLVER INTO MATHEMATICA® ENVIRONMENT

Miroslav Lutovac, Singidunum University, Belgrade, Serbia,
Vladimir Mladenovic, University of Kragujevac, Faculty of Technical Sciences, Čačak, Serbia,
Maja Lutovac Banduka, Institute, Belgrade, Serbia

EKI1.4

ANALYSIS OF LOSSLESS QUARTZ CRYSTALS FILTERS USING SCHEMATICSOLVER AND WOLFRAM LANGUAGE

Miroslav Lutovac, Singidunum University, Belgrade, Serbia,
Vladimir Mladenovic, University of Kragujevac, Faculty of Technical Sciences, Čačak, Serbia,
Maja Lutovac Banduka, Institute, Belgrade, Serbia

EKI1.5

MULTIFRACTAL SPECTRUM OF THE IMAGES OBTAINED BY COPY MOVE METHOD

Aleksandra Pavlovic, Technical Department, State university of Novi Pazar, Novi Pazar, Serbia,
Ana Gavrovska, Telecommunications Department, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia,
Irini Reljin, Telecommunications Department, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia

EKI1.6

AN APPROACH TO FINDING AN OPTIMAL FPGA FOR MEMORY INTENSIVE PROBLEMS

Stefan Pijetlovic, RT-RK Institute for Computer Based Systems, Novi Sad, Serbia,
Miloš Subotić, RT-RK Institute for Computer Based Systems, Novi Sad, Serbia,
Nebojša Pjevalica, University of Novi Sad, Faculty of Technical Sciences, Computing and Control Engineering Dept. Novi Sad, Serbia

Session EK(I)2. Digital Systems, Image Processing, and Modeling of Medical and Analog Signals

EKI2.1

COMPARISON OF ESTIMATION FORMULAE FOR THE LENGTH AND ORDER OF POLYNOMIAL-BASED FILTER

Djordje Babic, School of Computing, University Union, Belgrade, Belgrade, Serbia 

EKI2.2

EFFICIENT IMPLEMENTATION OF THE HALF-BAND FIR BASED MULTISTAGE DECIMATOR

Bogdan Marković, University of Belgrade, School of Electrical Engineering, Belgrade, Serbia and Bitgear Wireless Design Services LLC, Zemun, Belgrade, Serbia,
Miloš Bjelić, University of Belgrade, School of Electrical Engineering, Belgrade, Serbia,
Miodrag Stanojević, University of Belgrade, School of Electrical Engineering, Belgrade, Serbia and Bit Projekt d.o.o, Belgrade, Serbia
Jelena Ćertić, University of Belgrade, School of Electrical Engineering, Belgrade, Serbia

EKI2.3

Comments on Human Visual Attention in High Dynamic Range Images

Ana Gavrovska, Telecommunications Department, School of Electrical Engineering, University of Belgrade,
Irini Reljin, Telecommunications Department, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia,
Andreja Samčović, Faculty of Transport and Traffic Engineering, Belgrade, Serbia,
Valery Starovoitov, United Institute of Informatics Problems, Minsk, Belarus,
Milan Milivojević, Department of Telecommunications, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia

EKI2.4

GRAPHICAL INTERFACE FOR ANALYZING HER2 FLUORESCENT IN SITU HYBRIDIZATION IMAGES

Marijeta Slavković-Ilić, Innovation Center of the School of Electrical Engineering, University of Belgrade, Belgrade, Serbia,
Milorad Paskaš, Innovation Center of the School of Electrical Engineering, University of Belgrade, Belgrade, Serbia,
Milan Milivojević, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia,
Branimir Reljin,School of Electrical Engineering, University of Belgrade, Belgrade, Serbia

EKI2.5

PYTHON BASED PHYSIOLOGICAL SIGNAL PROCESSING FOR VITAL SIGNS MONITORING

Milan Milivojević, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia,
Ana Gavrovska, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia,
Irini Reljin, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia,
Branimir Reljin, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia 

Session EK(I)3. Systems for High Technologies and Intelligent Signal Processing

EKI3.1

Analysis and Selection of Components for Active SWIR/NIR Vision Systems

Dragana Perić, Vlatacom Institute of High Technologies, Belgrade, Serbia,
Branko Livada, Vlatacom Institute of High Technologies, Belgrade, Serbia,
Miroslav Perić, Vlatacom Institute of High Technologies, Belgrade, Serbia

EKI3.2

ANALYSIS OF SWIR IMAGERS APPLICATION IN ELECTRO-OPTICAL SYSTEMS

Dragana Perić, Vlatacom Institute of High Technologies, Belgrade, Serbia,
Branko Livada, Vlatacom Institute of High Technologies, Belgrade, Serbia

EKI3.3

CHALLENGES OF LASER RANGE FINDER INTEGRATION IN ELECTRO-OPTICAL SURVEILLANCE SYSTEM

Branko Livada, Vlatacom Institute of High Technologies, Belgrade, Serbia,
Dragana Perić Vlatacom Institute of High Technologies, Belgrade, Serbia,
Miroslav Perić, Vlatacom Institute of High Technologies, Belgrade, Serbia

EKI3.4

UNIFIED INTERFACING SOLUTION IN VIDEO PROCESSING PLATFORMS BASED ON FPGA

Marija Trifunović, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia and VLATACOM Institute, Belgrade, Serbia,
Ilija Popadić, , School of Electrical Engineering, University of Belgrade, Belgrade, Serbia and VLATACOM Institute, Belgrade, Serbia,
Vojislav Lukic VLATACOM Institute, Belgrade, Serbia,
Miroslav Peric, VLATACOM Institute, Belgrade, Serbia

EKI3.5(The Best Section Paper)

MARITIME SURVEILLANCE IMAGE ENHANCEMENT: A COMPARISON AND IMPROVEMENT OF DEHAZING TECHNIQUES

Branka Stojanović, Institute Vlatacom, Belgrade, Serbia,
Vojislav Lukić, Institute Vlatacom, Belgrade, Serbia,
Saša Milićević, Institute Vlatacom, Belgrade, Serbia,
Srđan Stanković, Institute Vlatacom, Belgrade, Serbia

ELECTRONICS – ELI

Session ELI1. Electronic Circuits and Applications

ELI1.1 (Invited paper)

Study framework for DBBT master in Western Balkans countries

Slobodan Bojanić, Universidad Politecnica de Madrid, ETSI Telecomunicacion, Madrid, Spain
Mile Petrović, Faculty of Technical Sciences, University of Pristina in Kosovska Mitrovica, Serbia
Branimir Jakšić, Faculty of Technical Sciences, University of Pristina in Kosovska Mitrovica, Serbia
Siniša Ilić , Faculty of Technical Sciences, University of Pristina in Kosovska Mitrovica, Serbia and
Matevž Pogačnik , Univerza v Ljubljani, Slovenia

ELI1.2

A highly linear CMOS TIA based on tripleinverter amplifier

Dusan Krcum, School of Electrical Engineering, University of Belgrade, NovelIC Microsystems, Belgrade, Serbia
Ivan Milosavljevic, School of Electrical Engineering, University of Belgrade, NovelIC Microsystems, Belgrade, Serbia
Djordje Glavonjic, School of Electrical Engineering, University of Belgrade, NovelIC Microsystems, Belgrade, Serbia
Darko Tasovac, NovelIC Microsystems, Belgrade, Serbia
Lazar V. Saranovac, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia

ELI1.3

Analysis of Area Efficiency of 12-bit Switched Capacitor DAC Topologies used in SAR ADC

Vladimir Petrović, School of Electrical Engineering, University of Belgrade, Serbia
Dragomir El Mezeni, School of Electrical Engineering, University of Belgrade, Serbia
Radivoje Đurić, School of Electrical Engineering, University of Belgrade, Serbia
Jelena Popović-Božović, School of Electrical Engineering, University of Belgrade, Serbia

ELI1.4

On The Design of Short Wordlength FIR Filters

Miljan Petrovic, Faculty of Electronic Engineering in Nis, Serbia
Branislav Petrović, Faculty of Electronic Engineering in Nis, Serbia

ELI1.5

Optimal Parameters of the IQ Imbalance Correction Algorithm Based on Adaptive Filter

Miljan Petrovic, Faculty of Electronic Engineering, University of Niš, Niš, Serbia
Miljana Milic, Faculty of Electronic Engineering, University of Niš, Niš, Serbia
Srđan Milenković, Faculty of Electronic Engineering, University of Niš, Niš, Serbia

ELI1.6

Design of IIR Filters based on all-pole Critical Monotonic Amplitude Characteristic analog prototypes

Dejan Mirković, University of Nis, Faculty of electronic engineering, Niš, Serbia
Miona Andrejević-Stošović, University of Nis, Faculty of electronic engineering, Niš, Serbia
Vančo Litovski, University of Bath,  United Kongdom
 Milena Stanojlović, Innovation Centre of Advanced Technologies Ltd., Niš, Serbia

ELI1.7

A Custom Serial Peripheral Interface (SPI) Bus Slave Controller with Read/Write Register Banks

Vladimir Milovanović, Faculty of Engineering, University of Kragujevac, Kragujevac, Serbia
Darko Tasovac, NovelIC Microsystems, Belgrade, Serbia (e-mail: darko.tasovac@novelic.com)

Sesija ELI2. Electronics and Power

ELI2.1

Worst Case Start-up Estimation of the Half Wave Capacitive Divider Power Supply

Vladimir Rajović, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia
Nenad Jovičić, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia
Aleksandra Lekić, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia

ELI2.2

New Current-Mode Full-Wave Precision Rectifier Based on Two CCII- and Two Diodes

Milan Veskovic, Faculty of Technical Sciences, University of Kragujevac, Cacak, Serbia
Slobodan Djukic, Faculty of Technical Sciences, University of Kragujevac, Cacak, Serbia

ELI2.3

Design and Realization of a Interleaved Boost Converter with GaN FETs and SiC Diodes

Zoran Zivanovic, IMTEL KOMUNIKACIJE AD, Belgrade, Serbia
Vladimir Smiljakovic, IMTEL KOMUNIKACIJE AD, Belgrade, Serbia

ELI2.4

Design and analysis of battery management system

Dragana Petrovic, Iritel a.d. Beograd, Belgrade, Serbia
Miroslav Lazić, Iritel a.d. Beograd, Belgrade, Serbia
Milan Pajnić, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia
Ivo Marković, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia

ELI2.5

Implementation of Recursive Least Square Method in Active Power Filters Control

Borisav Jovanovic, Faculty of Electronic Engineering, University of Niš, Niš, Serbia
Predrag Petkovic, Faculty of Electronic Engineering, University of Niš, Niš, Serbia
Srđan Milenković Faculty of Electronic Engineering, University of Niš, Niš, Serbia

ELI2.6

Application of ELM Algorithm in Characterization of Nonlinear Loads

Miona Andrejević-Stošović, University of Niš, Faculty of Electronic Engineering, Niš, Serbia
Marko Dimitrijević, University of Niš, Faculty of Electronic Engineering, Niš, Serbia
Dejan Stevanović, Innovation Centre of Advanced Technologies (ICAT), Niš, Serbia.

ELI2.7

On the implementation of modern power transistors in low-voltage circuit breakers

Session ELI3. Electronic Systems and Modelling

ELI3.1 (The Best Section Paper)

Method for measuring the settling time of integrated PLL using Spectrum Analyzer

Pavle Jovanovic, Lime Microsystems, Belgrade, Serbia
Dusan Grujic, School of Electrical Engineering, Belgrade and Lime Microsystems, Belgrade, Serbia
Milan Savic, Lime Microsystems, Belgrade, Serbia
Lazar Saranovac, School of Electrical Engineering, University of Belgrade, Belgrad, Serbia

ELI3.2

High-level Power Modeling of CC430 SoC

Strahinja Jankovic, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia
Lazar Saranovac, School of Electrical Engineering, University of Belgrade, Belgrade, Serbia

ELI3.3 (Best Young Researcher's Paper)

Person detection counter based on mm-Wave radar technology

Djordje Glavonjic, School of Electrical Engineering, University of Belgrade, NovelIC Microsystems, Belgrade, Serbia
Ivan Milosavljevic, School of Electrical Engineering, University of Belgrade, NovelIC Microsystems, Belgrade, Serbia
Dusan Krcum, School of Electrical Engineering, University of Belgrade, NovelIC Microsystems, Belgrade, Serbia
Veljko Mihajlović, School of Electrical Engineering, University of Belgrade, NovelIC Microsystems, Belgrade, Serbia
Lazar V. Saranovac , School of Electrical Engineering, University of Belgrade,  Belgrade, Serbia

ELI3.4

Mobile Robot Odometry Using High Resolution Incremental Encoders and Single Board Computers

Vladimir Sibinović, Faculty of Electronic Engineering, University of Niš, Niš, Serbia
Vladimir Mitić, Faculty of Electronic Engineering, University of Niš, Niš, Serbia
Miloš Petković, Faculty of Electronic Engineering, University of Niš, Niš, Serbia
Darko Todorović, Faculty of Electronic Engineering, University of Niš, Niš, Serbia
Goran Đorđević, Faculty of Electronic Engineering, University of Niš, Niš, Serbia

ELI3.5 (Best Young Researcher's Paper)

A Matlab/Simulink Model of a Langevin’s Ultrasonic Power Transducers

Igor Jovanović, University of Niš, Faculty of Electronic Engineering, Niš, Serbia
Uglješa Jovanović , University of Niš, Faculty of Electronic Engineering, Niš, Serbia
Dragan Mančić, University of Niš, Faculty of Electronic Engineering, Niš, Serbia

METROLOGY – MLI

Session MLI1. Metrology and Measurement Methods

MLI1.1 (Invited paper)

ASSESSING THE CURRENT DENSITIES INDUCED BY E&M LOW FREQUENCY FIELDS IN HUMAN BODY

Alexandru Salceanu, Department of Electrical Measurements and Electrotehnical Materials, Technical University „Gheorghe Asachi” of Iasi, Romania

MLI1.2 (Invited paper)

AN APPLICATION OF MONTE CARLO METHOD FOR THE UNCERTAINTY ESTIMATION IN THE CASE OF NON-LINEAR MEASUREMENT EQUATION: AN ENGINEERING APPROACH

Jaroslaw Makal, Department of Theoretical Electrotechnics and Metrology, Faculty of Electrical Engineering of Bialystok University of Technology (BUT), Poland

MLI1.3

Operability of an interval criterion for determining the steady state of the transient in the measuring circuit

Anton Volkov, National Research University “Moscow Power Engineering Institute”, Russia Anastasia Umnyagina, MPEI, Russia
Yury Bekhtin, Ryazan State Radio Engineering University, Russia
Aleksey Lupachev, MPEI, Russia
Tatiana Kovaleva, MPEI, Russia

MLI1.4

A RESEARCH ON THE INFLUENCE OF NON-IDEAL ANALOG-TO-DIGITAL CONVERTER ON THE MEASUREMENT ERROR OF FREQUENCY

Andrey Serov, National Research University “Moscow Power Engineering Institute”, Russia
Alexander Shatokhin, National Research University “Moscow Power Engineering Institute”, Russia
Ivan Konchalovsky, National Research University “Moscow Power Engineering Institute”, Russia

MLI1.5

OPTIMIZATION THD FACTOR MEASUREMENT WITH STOCHASTIC METHOD

Velibor Pjevalica, JP Srbijagas, Serbia
Nebojša Pjevalica, University of Novi Sad, Serbia
Nenad Petrović, School of Electrical Engineering, Serbia
 Nikola Teslić, University of Novi Sad, Serbia

MLI1.6

SIMPLE MEASUREMENT OF MAGNETOMECHANICAL EFFECT OF CYLINDRICAL STEEL SHAFT UNDER STATIC TORSIONAL STRESS

Vojislav Vujičić, Faculty of Technical Sciences in Čačak, Serbia
Miloš Božić, Faculty of Technical Sciences in Čačak, Serbia
Branko Koprivica, Faculty of Technical Sciences in Čačak, Serbia
 Alenka Milovanović, Faculty of Technical Sciences in Čačak, Serbia

Session ML(I)2. Metrology and Mesurement Systems

MLI2.1

ADDITION TO THE EXPERIMENTAL SOLUTION DEVELOPMENT FOR THE STOCHASTIC MEASUREMENT OF EOG SIGNALS

Jelena Đorđević-Kozarov, University of Niš, Faculty of Electronic Engineering , Serbia
Platon Sovilj, University of Novi Sad, Faculty of Technical Sciences, Serbia
Vladimir Vujičić, University of Novi Sad, Faculty of Technical Sciences, Serbia
Dejan Mitić, University of Niš, Faculty of Electronic Engineering, Serbia
Dragan Radenković, University of Niš, Faculty of Electronic Engineering, Serbia  

MLI2.2

DESIGN AND VERIFICATION OF FPGA HIGH SPEED PCIE REAL-TIME DATA ACQUISITION SYSTEM

Miloš Reljin, RT-RK, Serbia
Miloš Subotić, RT-RK, Serbia

MLI2.3

IMPLEMENTATION OF MONTE CARLO METHOD FOR THE DETERMINATION OF UNCERTAINTY IN MEASUREMENT

Marina Bulat, University of Novi Sad, Faculty of Technical Sciences, Serbia
Bojan Vujicic, University of Novi Sad, Faculty of Technical Sciences, Serbia
Dragan Pejic, University of Novi Sad, Faculty of Technical Sciences, Serbia
Marjan Urekar, University of Novi Sad, Faculty of Technical Sciences, Serbia
Djordje Novakovic, University of Novi Sad, Faculty of Technical Sciences, Serbia

MLI2.4

MEASUREMENT UNCERTAINTY OF ONE-BIT A/D CONVERTER

Ljubica Župunski, University of Novi Sad, Faculty of Technical Sciences, Serbia
Vladimir Vujičić, University of Novi Sad, Faculty of Technical Sciences, Serbia
Ivan Župunski, University of Novi Sad, Faculty of Technical Sciences, Serbia
Vesna Spasić Jokić, University of Novi Sad, Faculty of Technical Sciences, Serbia

MLI2.5

MEASUREMENT AND RECOGNITION OF EVENTS IN LOW VOLTAGE NETWORKS BY USING 2-BIT SDMM

Atila Juhas, University of Novi Sad, Faculty of Technical Sciences, Serbia
Platon Sovilj, University of Novi Sad, Faculty of Technical Sciences, Serbia
Vladimir Vujičić, University of Novi Sad, Faculty of Technical Sciences, Serbia

MICROELECTRONICS AND OPTOELECTRONICS – MOI

Session MOI1 Microelectronics

MOI1.1 (Invited paper)

Ultra-Low Power, Sub-threshold Design - From Watch Microelectronics to IoT Integrated Circuits

Dragan Manić, Swiss Center for Electronics and Microtechnology, CSEM, Switzerland

MOI1.2

Dwell and phase time singularities in electron tunneling through double complex barrier

Nikola Opačak, School of Electrical Engineering, University of Belgrade, Serbia
Vitomir Milanović, School of Electrical Engineering, University of Belgrade, Serbia
Jelena Radovanović, School of Electrical Engineering, University of Belgrade, Serbia

MOI1.3

Hardness response and adhesion of thin copper films on alloy substrates

Ivana Mladenović, Centre of Microelectronics Technology and Metallurgy, University of Belgrade, Serbia
Jelena Lamovec, Centre of Microelectronics Technology and Metallurgy, University of Belgrade, Serbia
Vesna Jovic, Centre of Microelectronics Technology and Metallurgy, University of Belgrade, Serbia
Bogdan Popovic, Centre of Microelectronics Technology and Metallurgy, University of Belgrade, Serbia
Milos Vorkapic, Centre of Microelectronics Technology and Metallurgy, University of Belgrade, Serbia
Vesna Radojevic, Faculty of Technology and Metallurgy, University of Belgrade, Serbia

MOI1.4

Analysis of the Time Response of Chemical and Biological Microfluidic Sensors with a Micro/Nanoscale Active Surface

Ivana Jokic, Institute of Chemistry, Technology and Metallurgy – Center of Microelectronic Technologies, University of Belgrade, Serbia
Zoran Djuric, Serbian Academy of Sciences and Arts and Institute of Technical Sciences of SASA, Belgrade, Serbia
Katarina Radulovic, Institute of Chemistry, Technology and Metallurgy – Center of Microelectronic Technologies, University of Belgrade, Serbia
Miloš Frantlović, Institute of Chemistry, Technology and Metallurgy – Center of Microelectronic Technologies, University of Belgrade, Serbia
Katarina Cvetanovic Zobenica, Institute of Chemistry, Technology and Metallurgy – Center of Microelectronic Technologies, University of Belgrade, Serbia

Session MOI2 Microsystems

MOI2.1

Microfabrication of bifurcated microchannels with PDMS and ABS

Milena Rasljic, Institute of Chemistry, Technology and Metallurgy – Center of Microelectronic Technologies, University of Belgrade, Serbia
Ivana I. Gadjanski, Innovation Center, Faculty of Mechanical Engineering, University of Belgrade, Serbia
Milce M. Smiljanic, Institute of Chemistry, Technology and Metallurgy – Center of Microelectronic Technologies, University of Belgrade, Serbia
Novica Z. Jankovic, Faculty of Mechanical Engineering, University of Belgrade, Serbia
Zarko Lazic, Institute of Chemistry, Technology and Metallurgy – Center of Microelectronic Technologies, University of Belgrade, Serbia
Katarina Cvetanovic Zobenica, Institute of Chemistry, Technology and Metallurgy – Center of Microelectronic Technologies, University of Belgrade, Serbia

MOI2.2

A Software Application for Automatic Characterization of Piezoresistive MEMS Pressure Sensors

Predrag Poljak, Institute of Chemistry, Technology and Metallurgy – Center of Microelectronic Technologies, University of Belgrade, Serbia
Miloš Frantlović, Institute of Chemistry, Technology and Metallurgy – Center of Microelectronic Technologies, University of Belgrade, Serbia
Branko Vukelić, Institute of Chemistry, Technology and Metallurgy – Center of Microelectronic Technologies, University of Belgrade, Serbia
Danijela Randjelović, Institute of Chemistry, Technology and Metallurgy – Center of Microelectronic Technologies, University of Belgrade, Serbia
Miloš Vorkapić, Institute of Chemistry, Technology and Metallurgy – Center of Microelectronic Technologies, University of Belgrade, Serbia
Dana Vasiljević-Radović, Institute of Chemistry, Technology and Metallurgy – Center of Microelectronic Technologies, University of Belgrade, Serbia

MOI2.3

A Steady-State SPICE Modeling of the Thermoelectric Wireless Sensor Network Node

Aneta Prijić, Faculty of Electronic Engineering, University of Niš, Serbia
Miloš Marjanović, Faculty of Electronic Engineering, University of Niš, Serbia
Ljubomir Vracar, Faculty of Electronic Engineering, University of Niš, Serbia
Danijel Dankovic, Faculty of Electronic Engineering, University of Niš, Serbia
Dejan Milic, Faculty of Electronic Engineering, University of Niš, Serbia
Zoran Prijić, Faculty of Electronic Engineering, University of Niš, Serbia

Session MOI3 nanoETRAN

MOI3.1

Copper-Nickel heterometallic multilayer composites for plasmonic applications

Ivana Mladenović, Institute of Chemistry, Technology and Metallurgy – Center of Microelectronic Technologies, University of Belgrade, Serbia
Zoran Jakšić, Institute of Chemistry, Technology and Metallurgy – Center of Microelectronic Technologies, University of Belgrade, Serbia
Marko Obradov, Institute of Chemistry, Technology and Metallurgy – Center of Microelectronic Technologies, University of Belgrade, Serbia
Slobodan Vuković, Institute of Chemistry, Technology and Metallurgy – Center of Microelectronic Technologies, University of Belgrade, Serbia
Goran Isić, Center for Solid State Physics and New Materials, Institute of Physics, University of Belgrade, Serbia
Jelena Lamovec Institute of Chemistry, Technology and Metallurgy – Center of Microelectronic Technologies, University of Belgrade, Serbia

MOI3.2

Tailorable spectral dispersion of copper-nickel 1D plasmonic crystals

Marko Obradov, Institute of Chemistry, Technology and Metallurgy – Center of Microelectronic Technologies, University of Belgrade, Serbia
Zoran Jakšić, Institute of Chemistry, Technology and Metallurgy – Center of Microelectronic Technologies, University of Belgrade, Serbia
Ivana Mladenović, Institute of Chemistry, Technology and Metallurgy – Center of Microelectronic Technologies, University of Belgrade, Serbia
Slobodan Vuković, Institute of Chemistry, Technology and Metallurgy – Center of Microelectronic Technologies, University of Belgrade, Serbia
Goran Isić, Center for Solid State Physics and New Materials, Institute of Physics, University of Belgrade, Serbia
Dana Vasiljević-Radović, Institute of Chemistry, Technology and Metallurgy – Center of Microelectronic Technologies, University of Belgrade, Serbia
Jelena Lamovec, Institute of Chemistry, Technology and Metallurgy – Center of Microelectronic Technologies, University of Belgrade, Serbia

MOI3.3

Detection of helical edge states in a square shaped HgTe quantum dots

Dušan Topalović, School of Electrical Engineering and Vinča Institute of Nuclear Sciences, University of Belgrade, Serbia
Nemanja Čukarić, School of Electrical Engineering, University of Belgrade, Serbia
Vladimir Arsoski, School of Electrical Engineering, University of Belgrade, Serbia
Milan Tadić, School of Electrical Engineering, University of Belgrade, Serbia

MOI3.4

Electronic properties of hexagonal-shaped phosphorene nanorings

Vladimir Arsoski, School of Electrical Engineering, University of Belgrade, Serbia
Nemanja Čukarić, School of Electrical Engineering, University of Belgrade, Serbia
Dušan Topalović, School of Electrical Engineering and Vinča Institute of Nuclear Sciences, University of Belgrade, Serbia
Milan Tadić, School of Electrical Engineering, University of Belgrade, Serbia

MICROWAVE TECHNIQUE, TECHNOLOGIES AND SYSTEMS – MTI

Session MTI1. Microwave technique, technologies and systems

MTI1.1 (Invited paper)

RF AND MICROWAVE FILTER DESIGN BY MEANS OF SINGLE TRANSISTOR ACTIVE INDUCTOR: A REVIEW

Vincenzo Stornelli, Department of Industrial and Information Engineering and Economics, University of L’Aquila, Italy
Leonardo Pantoli, Department of Industrial and Information Engineering and Economics, University of L’Aquila, Italy
Alfiero Leoni, Department of Industrial and Information Engineering and Economics, University of L’Aquila, Italy
Giorgio Leuzzi, Department of Industrial and Information Engineering and Economics, University of L’Aquila, Italy

MTI1.2 (The Best Section Paper)

CONCEPT OF DUAL-BAND BANDPASS FILTERS WITH ANTIPARALLEL CONFIGURATION

Sinisa Jovanovic, IMTEL Komunikacije, Belgrade, Serbia
Bratislav Milovanovic, University Singidunum, Center Niš, Serbia

MTI1.3

CALCULATION OF LOSS USING FULL AND SURROGATE EM MODELS OF SUBSTRATE INTEGRATED WAVEGUIDE AT KA BAND

Veljko Napijalo, WIPL-Dd.o.o, Belgrade, Serbia
Branko Kolundžija, School of Electrical Engineering, University of Belgrade, Serbia

MTI1.4

CROSSTALK SUPPRESSION IN MIMO WIRELESS TRANSMITTERS FOR 4G NETWORKS

Milan Cabarkapa, School of Electrical Engineering, University of Belgrade, Serbia
Natasa Neskovic, School of Electrical Engineering, University of Belgrade, Serbia
Milan Prokin, School of Electrical Engineering, University of Belgrade, Serbia
Aleksandar Neskovic, School of Electrical Engineering, University of Belgrade, Serbia
Djuradj Budimir, Faculty of Science and Technology, University of Westminster, London, UK

MTI1.5

MICROWAVE POSITION MICROSTRIP SENSOR  WITH A RESONANT OPEN STUB AND A SLOT

Dušan Nešić, Centre of Microelectronic Technologies, Institute of Chemistry, Technology and Metallurgy, University of Belgrade, Serbia

MTI1.6

A NOVEL ANN APPROACH FOR DIRECT MICROWAVE FET NOISE WAVE PARAMETER EXTRACTION

Vladica Đorđević, Innovation Centre of Advanced Technologies, Niš, Serbia
Zlatica Marinković, Faculty of Electronic Engineering, University of Niš, Serbia
Olivera Pronić-Rančić, Faculty of Electronic Engineering, University of Niš, Serbia
Vera Marković, Faculty of Electronic Engineering, University of Niš, Serbia

MTI1.7

VHF GYSEL 3 DB POWER DIVIDER/COMBINER

Veljko Crnadak, IMTEL Komunikacije, Belgrade, Serbia
Siniša Tasić, IMTEL Komunikacije, Belgrade, Serbia

NEW MATERIALS – NMI

Session NMI1. New Materials

NMI1.1 (Invited paper)

TRANSPORT PARAMETERS OF ALKALI METAL IONS IN DXE FOR TECHNOLOGICAL APPLICATIONS

Zeljka Nikitovic, Institute of Physics, University of Belgrade

NMI1.2

ELECTRICAL RESISTIVITY OF Er/Yb DOPED BaTiO3 CERAMICS

Milos Djordjevic, University of Niš, Faculty of Electronic Engineering, Niš
Miloš Marjanović, University of Niš, Faculty of Electronic Engineering, Niš
Vesna Paunović, University of Niš, Faculty of Electronic Engineering, Niš
Vojislav Mitic, University of Niš, Faculty of Electronic Engineering, Niš
Zoran Prijić, University of Niš, Faculty of Electronic Engineering, Niš

NUCLEAR ENGINEERING – NTI

NTI1 Radiation measurement methods

NTI1.1   (Invited paper)

Radioactive Waste Retrieval Technologies - New technological approaches

Marina Sokcic-Kostic, NUKEM Technologies Engineering Services GmbH, Alzenau, Germany

NTI1.2

Establishing Standard X-ray Narrow-beam Radiation Qualities in the Secondary Standard Dosimetry Laboratory

Nikola Krzanovic, School of Electrical Engineering and Vinča Institute of Nuclear Sciences, University of Belgrade, Serbia
Filip Haralambos Apostolakopoulos, School of Electrical Engineering, University of Belgrade; Public company “Nuclear Facilities of Serbia”, Belgrade, Serbia
Miloš Živanović, Vinča Institute of Nuclear Sciences, University of Belgrade, Serbia
Milos Vujisic, School of Electrical Engineering, University of Belgrade, Serbia
Koviljka Stanković, School of Electrical Engineering, University of Belgrade, Serbia
Đorđe Lazarević, Vinča Institute of Nuclear Sciences, University of Belgrade, Serbia

NTI1.3

New gamma method for the radon exhalation measurement from building materials

Ahmed Awhida, Faculty of Technology and Metallurgy, University of Belgrade, Serbia
Predrag Ujić, Vinča Institute of Nuclear Sciences, University of Belgrade, Serbia
Igor Čeliković, Vinča Institute of Nuclear Sciences, University of Belgrade, Serbia
Dusan Nikezic, Vinča Institute of Nuclear Sciences, University of Belgrade, Serbia
Katarina Karadžić, Faculty of Electrical Engineering, University of Belgrade, Serbia
Boris Lončar, Faculty of Technology and Metallurgy, University of Belgrade, Serbia

NTI1.4

Occupational External and Internal Exposure Monitoring in the Public Company “Nuclear Facilities of Serbia”

Ivan Knežević, Public company “Nuclear Facilities of Serbia”, Belgrade, Serbia
Nevena Zdjelarević, Public company “Nuclear Facilities of Serbia”, Belgrade, Serbia
Dragana Čekerevac Mirković, Public company “Nuclear Facilities of Serbia”, Belgrade, Serbia

NTI1.5 (Best Young Researcher's Paper)

Comparison of the Angular Response of Thermoluminescent and Optically Stimulated Luminescent Personal Dosimeters

Filip Haralambos Apostolakopoulos, School of Electrical Engineering, University of Belgrade; Public company “Nuclear Facilities of Serbia”, Belgrade, Serbia
Nikola Kržanović, School of Electrical Engineering and Vinča Institute of Nuclear Sciences, University of Belgrade, Serbia
Luka Perazić, School of Electrical Engineering, University of Belgrade; Public company “Nuclear Facilities of Serbia”, Belgrade, Serbia
Koviljka Stanković, School of Electrical Engineering, University of Belgrade, Serbia

NTI1.6

Activity Measurement of Soil Samples Taken in the Vicinity of the RA and RB Nuclear Reactors

Dragana Čekerevac Mirković, Public company “Nuclear Facilities of Serbia”, Belgrade, Serbia
Ivana Maksimović, Public company “Nuclear Facilities of Serbia”, Belgrade, Serbia
Miodrag Milošević, Public company “Nuclear Facilities of Serbia”, Belgrade, Serbia

NTI2  Radiation transport modelling for various applications

NTI2.1

Estimation of eye lens dose for nurses in interventional cardiology using Monte Carlo simulations

Predrag Bozovic, School of Electrical Engineering and Vinča Institute of Nuclear Sciences, University of Belgrade, Serbia
Olivera Ciraj-Bjelac, School of Electrical Engineering and Vinča Institute of Nuclear Sciences, University of Belgrade, Serbia
Danijela Arandjic, School of Electrical Engineering and Vinča Institute of Nuclear Sciences, University of Belgrade, Serbia
Sandra Ceklic, Vinča Institute of Nuclear Sciences, University of Belgrade, Serbia

NTI2.2

Simulation of proton irradiation of charge trapping flash memory cells

Katarina Karadzic, School of Electrical Engineering, University of Belgrade, Serbia

NTI2.3 (The Best Section Paper)

Methods for Non-destructive Radiological Characterisation by In Situ Spectrometry Measurements

Miodrag Milošević, Public company “Nuclear Facilities of Serbia”, Belgrade, Serbia
Milan Petrović, Public company “Nuclear Facilities of Serbia”, Belgrade, Serbia

NTI2.4

Beta-Ray Induced X-Ray Spectrometry for Non-destructive Measurement of Tritium in Heavy Water of the RA Research Reactor

Miodrag Milošević, Public company “Nuclear Facilities of Serbia”, Belgrade, Serbia
Milan Petrović, Public company “Nuclear Facilities of Serbia”, Belgrade, Serbia
Ivana Maksimović, School of Electrical Engineering, University of Belgrade and Public company “Nuclear Facilities of Serbia”, Belgrade, Serbia

NTI2.5

Simulation-based Comparison of Energy Deposition Pathways in Neutron-irradiated TiO2 Memristors

Milan Vujović, Serbian Radiation Protection and Nuclear Safety Agency, Belgrade, Serbia
Slobodan Milutinović, Vinča Institute of Nuclear Sciences, Belgrade, Serbia
Miloš Vujisić, School of Electrical Engineering, University of Belgrade, Serbia

ROBOTICS AND FLEXIBLE AUTOMATION – ROI

Session ROI1. Cyber-physical Systems & Industrial Robots

ROI1.1 (Invited paper)

EUROPEAN ROBOTICS INITIATIVES: PERSPECTIVES AND OPPORTUNITIES FOR SERBIA

Uwe Haass, former Secretary-General of the European robotics association euRobotics AISBL, the contractual partner of the European Commission in the European robotics programme SPARC, Muenchen, Germany

ROI1.2

GREY WOLF OPTIMIZATION ALGORITHM FOR SINGLE MOBILE ROBOT SCHEDULING

Milica Petrović, University of Belgrade - Faculty of Mechanical Engineering, Production Engineering Department, Laboratory for industrial robotics and artificial intelligence (robotics), Serbia 
Zoran Miljković, University of Belgrade - Faculty of Mechanical Engineering, Production Engineering Department, Laboratory for industrial robotics and artificial intelligence (robotics), Serbia 

ROI1.3

HAZARD IDENTIFICATION, RISK ASSESSEMENT AND SAFETY SYSTEM INTEGRATION FOR FLEXIBLE ROBOTIC CELL

ROI1.4

CLOUD-BASED DISTRIBUTED INTELLIGENCE OF ROBOT TEAM IN COMPLEX ACCIDENT SITUATION

Novak Zagradjanin, Ministry of Defence, Department for Defence Tecnologies,  Belgrade, Serbia
Aleksandar Rodić, Institute MIhajlo Pupin, Univeristy of Belgrade, Serbia

ROI1.5

NETWORKED MULTI-AGENT APPROACH FOR REDUNDANT MANIPULATOR CONTROL

Vuk Vujović, School of Electrical Engineering, University of Belgrade, Serbia
Kosta Jovanović, School of Electrical Engineering, University of Belgrade, Serbia

ROI1.6

PARTIAL POSE MEASUREMENTS FOR IDENTIFICATION OF DENAVIT-HARTENBERG PARAMETERS OF AN INDUSTRIAL ROBOT

Zaviša Gordić, School of Electrical Engineering, University of Belgrade, Serbia
Kosta Jovanović, School of Electrical Engineering, University of Belgrade, Serbia

ROI1.7

IMPLEMENTATION OF THE CONTROL ALGORITHM FOR THE ‘BUGGY’ MOBILE ROBOT VIA APPLICATION OF INFRARED DISTANCE MEASURING SENSORS

Slađan Kantar, School of Computing, University Union, Serbia
Miloš Jovanović, Institute Mihajlo Pupin, University of Belgrade, Serbia

Session ROI2. Advanced Service Robotic Systems

ROI2.1

DEVELOPMENT OF SOFT ROBOTIC GRIPPER WITH EMBEDDED ACTIVE ELEMENTS

Andrija Milojević, School of Energy Systems, Department of Mechanical Engineering, Laboratory of Intelligent Machines, Lappeenranta University of Technology, Finland and Faculty of Mechanical Engineering, University of Niš, Serbia
Žarko Ćojbašić, Faculty of Mechanical Engineering, University of Niš, Serbia 
Miša Tomić, Faculty of Mechanical Engineering, University of Niš, Serbia 
Heikki Handroos, School of Energy Systems, Department of Mechanical Engineering, Laboratory of Intelligent Machines, Lappeenranta University of Technology, Finland 

ROI2.2

NEW DESIGN OF SOFT ROBOTIC ARM FOR INFRASTRUCTURE INSPECTION

Ilija Stevanović, Institute Mihajlo Pupin, University of Belgrade, Serbia
Aleksandar Rodic, Institute Mihajlo Pupin, University of Belgrade, Serbia

ROI2.3

ELASTIC F TYPE CABLE – SUSPENDED PARALLEL ROBOT WITH SINGLE MODE

Mirjana Filipovic, Mihajlo Pupin Institute, University of Belgrade, Serbia
Ljubinko Kevac, School of Electrical Engineering, University of Belgrade, Serbia
Ana Djuric, Wayne State University, Detroit, MI 48202, U.S.A

ROI2.4

A NOVEL MODULAR ARCHITECTURE FOR CONVERSATIONAL ROBOTIC AGENTS

Milan Gnjatović, Faculty of Technical Sciences, University of Novi Sad, Serbia
Dragiša Mišković, Faculty of Technical Sciences, University of Novi Sad, Serbia
Srđan Savić, Faculty of Technical Sciences, University of Novi Sad, Serbia
Branislav Borovac, Faculty of Technical Sciences, University of Novi Sad, Serbia
Nemanja Maček, School of Electrical and Computer Engineering of Applied Studies, Belgrade, Serbia
Branimir Trenkić, School of Electrical and Computer Engineering of Applied Studies, Belgrade, Serbia

ROI2.5

SOCIAL HUMANOID ROBOT SARA: DEVELOPMENT AND DILEMMAS

Marko Penčić, Faculty of Technical Sciences, University of Novi Sad, Serbia
Maja Čavić, Faculty of Technical Sciences, University of Novi Sad, Serbia
Srđan Savić, Faculty of Technical Sciences, University of Novi Sad, Serbia
Milan Gnjatović, Faculty of Technical Sciences, University of Novi Sad, Serbia
Branislav Borovac, Faculty of Technical Sciences, University of Novi Sad, Serbia
Zhenli Lu, School of Electrical Engineering and Automation, Changshu Institute of Technology, China

ROI2.6

KINECT-BASED APPLICATION FOR PROGRESS MONITORING OF THE STRKE PATIENTS

Sofija Spasojevic, School of Electrical Engineering, University of Belgrade, Serbia and with the Institute for Systems and Robotics, Instituto Superior Técnico, University of Lisbon, Portugal 
Nela Ilic, School of Medicine, University of Belgrade, Serbia and with Clinic of Physical Medicine and Rehabilitation, Clinical Center of Serbia 
Aleksandar Rodic, , Institute Mihajlo Pupin, University of Belgrade, Serbia
José Santos-Victor,  Institute for Systems and Robotics, Instituto Superior Técnico, University of Lisbon, Portugal 

COMPUTING – RTI

Session RTI1. Computer Systems and Services

RTI1.1 (Invited paper)

CLOUD COMPUTING – TRENDS AND CHALLENGES

Eleni Karatza, Aristotle University of Thessaloniki, Greece

RTI1.2

IN VEHICLE PASSENGER PRESENCE DETECTION SYSTEM

Vladimir Nikolić, School of the Electrical Engineering, University of Belgrade, Serbia
Saša Stojanović, School of the Electrical Engineering, University of Belgrade, Serbia
Zaharije Radivojević, School of the Electrical Engineering, University of Belgrade, Serbia
Miloš Cvetanović, School of the Electrical Engineering, University of Belgrade, Serbia

RTI1.3

IMU BASED SYSTEM FOR COLLECTING DATA ABOUT THE TRANSPORT COMFORT

Željko Jovanović, Faculty of Technical Sciences in Čačak, Serbia
Dejan Vujičić, Faculty of Technical Sciences in Čačak, Serbia
Dragan Janković, Faculty of Electronic Engineering, Niš, Serbia

RTI1.4 (The Best Section Paper)

IMPLEMENTATION OF INVARIANT CODE MOTION OPTIMIZATION IN AN EMBEDDED PROCESSOR ORIENTED COMPILER INFRASTRUCTURE.DOC

Ivan Povazan, RT-RK, Institute for Computer Based Systems LCC, Serbia
Marko Krnjetin, RT-RK, Institute for Computer Based Systems LCC, Serbia
Miodrag Djukic, Faculty of Technical Sciences, Novi Sad, Serbia
Miroslav Popović, Faculty of Technical Sciences, Novi Sad, Serbia

RTI1.5

DESIGN AND IMPLEMENTATION OF HARDWARE PLATFORM FOR MONITORING HONEYBEE ACTIVITY

Uroš Pešović, School Faculty of Technical Sciences in Čačak, University of Kragujevac, Serbia
Siniša Ranđić, Faculty of Technical Sciences in Čačak, University of Kragujevac, Serbia
Zoran Stamenkovic, IHP, Germany

RTI1.6

ANOMALY DETECTION USING SMART INDICATORS FOR HARD DISK DRIVE FAILURE PREDICTION

Slađana Đurašević, Faculty of Technical Sciences in Čačak, University of Kragujevac, Serbia
Borislav Đorđević, InstituteMihailoPupin, Belgrade, Serbia

RTI1.7

IMPROVING SOFTWARE RAID 6 SYSTEMS BY THE MEANS OF PARALLELIZATION

Mihailo Vesović, School of the Electrical Engineering, University of Belgrade, Serbia
Borislav Đorđević, School of the Electrical Engineering, University of Belgrade, Serbia
Aleksandra Smiljanić, School of the Electrical Engineering, University of Belgrade, Serbia

Session RTI2. Software and System Modeling

RTI2.1

CONSTRUCTION OF FUZZY LINEAR SPACE BASED FIELD OPERATION LINES FOR AGRICULTURAL MACHINERY

Đorđe Obradović, Faculty of Technical Sciences University of Novi Sad, Serbia
Zora Konjović, University Singidunum Belgrade, Center Novi Sad, Serbia
Endre Pap, University Singidunum Belgrade, Serbia
Vuk Malbaša, Faculty of Technical Sciences University of Novi Sad, Serbia

RTI2.2

GENERAL CHARACTER SEGMENTATION APPROACH FOR MACHINE-TYPED DOCUMENTS

Vladan Vuckovic, Faculty of Electronic Engineering, Serbia
Boban Arizanovic, Faculty of Electronic Engineering, Serbia

RTI2.3

COMPUTING DATA ENCRYPTED BY PAILLIER ENCRYPTION SCHEME USING CASSANDRA DATABASE

Jelena Stankovski, Faculty of Technical Sciences, Serbia
Aleksandar Erdeljan, Faculty of Technical Sciences, Serbia
Ivana Kovačević, Faculty of Technical Sciences, Serbia
Nikola Dalčeković, Faculty of Technical Sciences, Serbia

RTI2.4

MATHEMATICAL MODEL FOR THE PREDICTION OF THE PATHOGEN’S OCCURRENCE ON FRUIT

Milos Ilic, Faculty of Technical Sciences, Serbia
Petar Spalevic, Faculty of Technical Sciences, Serbia
Stefan Panic, Faculty of Technical Sciences, Serbia
Mladen Veinovic, Singidunum University, Serbia

RTI2.5

ONE IMPLEMENTATION OF AN ENERGY EFFICIENT BUILDINGS CALCULATOR

Ivan Radonjić, Faculty of Architecture, University of Belgrade, Serbia
Ivo Marković, Faculty of Physics University of Belgrade, Serbia
Milivoje Miletić, School of Electrical Engineering, University of Belgrade, Serbia

RTI2.6

PROCESSING OF NEGATION IN SENTIMENT ANALYSIS FOR THE SERBIAN LANGUAGE

TELECOMMUNICATIONS – TEI

Session TEI1. Telecommunications 1

TEI1.1

ON THE TRANSMISSION OF THE HALFTONED IMAGE OVER DOBULE-WEIBULL CHANNEL

Bojan Prlinčević, HTPSZ
Petar Spalević, University of Pristina, Faculty of Technical Sciences
Stefan Panić, Faculty of Natural Science and Mathematics

TEI1.2

CALIBRATION OF LOCAL OSCILLATORS MISMATCH IN A MULTI-CHANNEL RECEIVING SYSTEM 

Miljko Erić, School of Electrical Engineering, Belgrade
Nenad Vukmirović, School of Electrical Engineering, Belgrade
Miloš Janjić, Innovative center School of Electrical Engineering, Belgrade

TEI1.3

OUTAGE PROBABILITY OF EGC RECEIVER IN TWDP CHANNEL

Nenad Milosevic, Universty of Nis, Faculty of Electronic Engineering
Petar Spalevic, University of Pristina, Faculty of Technical Sciences
Bojan Dimitrijevic, Universty of Nis, Faculty of Electronic Engineering
Zorica Nikolic, Universty of Nis, Faculty of Electronic Engineering

TEI1.4

AVERAGE BER OF DUAL-BRANCH FSO SYSTEM EMPLOYING SIM-BPSK INFLUENCED BY MALAGA ATMOSPHERIC TURBULENCE WITH POINTING ERRORS

Milica Petkovic, University of Nis, Faculty of Electronic Engineering 
Goran Djordjevic, University of Nis, Faculty of Electronic Engineering

TEI1.5 (The Best Section Paper)

ON STRUCTURE-CRITERION SWITCHING CONTROL FOR SELF-OPTIMIZED DECISION FEEDBACK EQUALIZER

Vladimir Krstić, Institute "Mihajlo Pupin", Belgrade
Nada Bogdanović, Institute "Mihajlo Pupin", Belgrade

TEI1.6

LOGATOME INTELLIGIBILITY ANALYSIS OF THE FM DEMODULATED SIGNAL

Svjetlana Kovačević, Faculty of Electrical Engineering, University of Banja Luka
Jovan Galić Faculty of Electrical Engineering, University of Banja Luka
Tatjana Pešić-Brđanin, Faculty of Electrical Engineering, University of Banja Luka

Session TEI2. Telecommunications 2

TEI2.1

THE PERFORMANCE EVALUATION OF NETMAP SOFTWARE SWITCH

Hasan Redžović, Innovation center of School of Electrical Engineering, University of Belgrade
Aleksandra Smiljanić, School of Electrical Engineering, University of Belgrade

TEI2.2

FAIR SERVICE ANALYSIS OF LOAD BALANCED BIRKHOFF VON NEUMANN SWITCHES

Srđan Durković, School of Electrical Engineering, Belgrade University
Zoran Čiča, School of Electrical Engineering, Belgrade University

TEI2.3

IP TRAFFIC GENERATOR BASED ON HIDDEN MARKOV MODELS

Hasan Redžović, Innovation center of School of Electrical Engineering, University of Belgrade
Aleksandra Smiljanić , School of Electrical Engineering, University of Belgrade
Milan Bjelica, School of Electrical Engineering, University of Belgrade

TEI2.4

SIMULATION OF TRAFFIC PROCESS IN MOBILE TELEPHONY SYSTEMS

Mladen Mileusnić, IRITEL A.D.
Dragan Mitić, IRITEL A.D.
Vladimir Matić, IRITEL A.D.
Aleksandar Lebl, IRITEL A.D.
Žarko Markov, IRITEL A.D.

TEI2.5

RUNNING NETWORK OF UNIKERNEL BASED MIDDLEBOXES ON LOW-COST COMMODITY COMPUTERS

Nataša Maksić, School of Electrical Engineering, University of Belgrade

TEI2.6

HYBRID GENETIC OPTIMIZATION ALGORITHM FOR TARGET LOCALIZATION USING TDOA MEASUREMENTS 

Maja Rosic, School of Electrical Engineering, University of Belgrade
Mirjana Simić, School of Electrical Engineering, University of Belgrade
Predrag Pejovic, School of Electrical Engineering, University of Belgrade

ARTIFICIAL INTELLIGENCE – VI

Session VII1. Artificial Intelligence – Application of Machine Learning in Artificial Intelligence

VII1.1

FREEDOM AND TRUTH IN THE AGE OF ARTIFICIAL INTELLIGENCE

Milan Milosavljević, Singidunum University, Belgrade, Serbia

VII1.2

AN INTELLIGENT PBL-BASED TUTORING SYSTEM FOR CRYPTOLOGY DOMAIN

Aleksandar Jevremovic, Sasa Adamovic, Goran Shimic, Marko Sarac, Mladen Veinovic and Milan Milosavljević, Singidunum University, Belgrade, Serbia